Incubator Accessories
-
Clear Acrylic Case Shell Housing For W1209 Digital Temp...
৳ 60.00- Product Name: XH-W1209 digital display thermostat housing
- Material: Acrylic
- Usage: Each board has a double-sided protective film, which can be removed after being torn off.
- Package includes: 6 x acrylic plates 8 x screws 8 x screws 4 x washers
-
Full automatic egg incubator Controller XM-18D
৳ 3,900.00Model: XM-18
Size: 15.8 * 8.6 * 7.8 cm
Operating voltage: 180v-240v,50HZ
Weight: 0.75 kg
Temperature display range: 0-99.9 ℃
Temperature control precision: ±0.1 ℃
Moisture display range: 0-99.9%RH
Humidity control accuracy: 3%RH
Relative humidity: less than 85%
Ambient temperature: – 20 ℃ ~ 70 ℃Number of eggs: up to 999
Egg cycle: 0-999 minutes (factory set at 90 minutes)
Egg turning time: 0-999 seconds (factory setting is 180 seconds)
Ventilation cycle: 0-999 minutes (factory set at 120 minutes)
Air change time: 0-999 seconds (factory setting is 15 seconds)
Output current: main and auxiliary heating 30A; other outputs are 10A;
number of output channels: 6 channels (main heating, auxiliary heating, exhaust [ventilation], left turning, right turning, humidification)
-
20 pcs DC Bulb Light 12V 21W BA15s for Lighting –...
৳ 396.00- 20 pcs Light Bulb 12V to 18v 21W BA15s for Lighitin – Heating – Incubator – Indicator – Incandescent Bulb.
- Replacement rapid response P21W 382 brake and indicator bulb from Ring Automotive.
- Faster light up, giving other drivers more reaction time.
- 20% brighter than standard bulbs.
- Reduces the chance of rear end collision.
- Base: BA15s SCC.
- Dimensions (HxWxD) 46mm x 25mm x 25mm.
- Voltage: 12V
- Wattage: 21W.
- ECE Type: P21W.
- E Regulation: 37 – Filament Lamps.
- Best for: Lighitin, Heating, Incubator, Indicator etc.
-
5pcs 200w Room Heater Lamp – 220v 200w Infrared H...
৳ 2,400.00200w Room Heater Lamp
Key word: Infrared Heater Element
Applicable Industries: Farms & Leaving Room
Power Source: Electric
Condition: New
Type: Infrared Heater
Material: Hard glass
Voltage: 220v
Power: 200w
Weight: 0.31 KG
Dimension(L*W*H): 12*12*14.5cm
Usage: pet for warm
Working Lifetime(Hour): 5000 Hours
- Optimal penetration into skin and muscles for ultimate relief of muscular pain
- 90% of energy transmitted as infrared heat
- Good balance between lifetime and heat output
- Red-colored lamps to reduce visual light emission and glare
- Providing relief from muscular pain and ailments such as rheumatism, lumbago, neuralgia and colds, etc.
- Instant, accurately controllable source of radiant heat
- Reflector shape allows concentrated heat to be applied where it is needed.
- PAR38 has a 100% aluminized internal reflector, which means that 100% of the heat leaves via the front.
- PAR38 has a small, round filament, which also contributes to more concentrated heat in the beam.
- Good balance between lifetime and heat output
- Red-colored lamps to reduce visual light emission and glare
- Providing relief from muscular pain and ailments such as rheumatism, lumbago, neuralgia and colds, etc.
- Promoting recovery from injury
- Providing comfort and cosmetic care
- Infrared Lamp BULB
- Use For All Infrared Lamp
-
HTC-2 Digital LCD Temperature & Humidity Meter Ala...
৳ 450.00- Temperature measurement range: -10 °C +50 °C (-14 °F +122 °F );
- Temperature measurement accuracy: ±1°C (1.8°F)
- Temperature resolution: ±0.1°C (0.2°F)
- Humidity measurement range: 10 % 99 % RH
- Humidity measurement accuracy: ±5%RH
- Humidity resolution: 1%
- Battery: 1xAAA 1.5V ( include )
-
W1209 with Clear Acrylic Casing Incubator Temperature C...
৳ 290.00- W1209 ডিজিটাল ইনকিউবেটর কন্ট্রোলার।
- এই কন্ট্রোলার দিয়েই অটোমেটিক ভাবে তাপমাত্রা নিয়ন্ত্রন করতে পারবেন।
- এই সার্কিট ব্যবহার করে খুব সহজেই টার্কি, তিতি, কোয়েল, হাঁস-মুরগীর ডিম ফোটাতে পারবেন।
- ব্যবহার ক্ষেত্র: ইনকিউবেটর, গিজার, এ্যাকুরিয়াম, হ্যাচারি, টোবাকো ফ্যাক্টরি, রংয়ের কারখানা, মেশিন রুম, ফ্রিজ, কম্প্রেসর, এ/সি, ঔষধ কোম্পানী ইত্যাদি।
- W1209 কালো পলির ইনটেক প্যাকেট থাকবে। ডিফল্ট অবস্হায় P0= C থাকে যা কুলিং যেমন এয়ারকন্ডিশন, ফ্রিজ, এয়ার কুলার এ তাপমাত্রা কন্ট্রোল করার জন্য।
- আপনি যদি ইনকিউবেটরে ব্যবহার করেন তার জন্য P0= H (হিটিং) করে নিতে হবে যেমন ইনকিউবেটর, হিটার, গিজার, সিলিং প্লেট এর তাপমাত্রা কন্ট্রোল করার জন্য
- কিভাবে করবেনঃ পাওয়ার দিয়ে সেট বাটন ৫ সেকেন্ড ধরে রাখলে P0 লেখা আসবে আবার সেট বাটন চাপলে C লেখা আসবে তারপর (+)/(-) বাটন চেপে C➡H করে আবার সেট বাটন চাপলে ৫ সেকেন্ড পর H সেভ হবে
- (উপরোক্ত লেখাগুলো কপিরাইটের আওতায় থাকবে)
- ম্যানুয়াল ডাউনলোড লিংকঃ https://drive.google.com/file/d/1tA599rTJWs2wHQervN4Lbvq8ZYoBFFT-/view?usp=drivesdk
- Supply 12V DC
- Control : AC / DC Light, Heater etc.
- Output Relay 20A
- NTC waterproof sensor
-
STC-3028 Digital Temperature and Humidity Controller
৳ 1,200.00Product Description:Switch the modes between cool and heat;Control temperature bysetting the temperature setting value and the difference value;Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds, temperature limit or when sensor error.Feature:Be able to control temperature and humidity at the same time.
Be able to connect with humidifier and dehumidifier equipment at the same time.
Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control.
Supporting Temp and Humidity Calibration
[Dual Display Window] Be able to display measured temperature/humidity and set temp/humidity at the same time
Specification:Model: STC-3028
Input voltage: AC110~220V± 10%, DC24V, DC12V
Measuring temperature range: -20°~+80°
Measuring humidity range: 00%RH~+100%RH
Accuracy: ±1°, 0.1%RH
Relay output contact capacity: 10A/240VAC
Sensor length: 1m
Set startup temperature(humidity):Press the “up” button once to display the starting temperature(humidity). Long press the “up” button for about 3 seconds,The required temperature(humidity) can be set by the up and down keys
Set stop temperature(humidity):Press the “down”button once to display the stop temperature(humidity). Long press the button for about 3 seconds and the stop temperature(humidity) number flashes. The required temperature(humidity) can be set by the up and down keys
Temperature/humidity correction:
Press “up” and “down” button at the same time.
-
-
XM-18 Automatic Incubator Controller for Egg Incubator
৳ 3,590.001.TemperatureMeasuringRange:0-99°
2.TemperatureMeasurementAccuracy:±°
3.HumidityMeasurementRange:0—
4.HumidityAccuracy:±
5.Numberofsignaloutput:7,(overtemperature,temperaturecontrol,insufficienttemperature,eggleft-turning,eggright-turning,humiditycontrol,alarm)
6.Themaximumoutputloadcurrent:temperaturecontrol,insufficienttemperature≤≤
7.Numberofegg-turning:themaximumrecordis999times.
8.cycle ofegg-turning:adjustmentof0–
9.eggturningtime:adjustmentfrom0to999seconds(thefactorydefaultis180seconds)
10.ventilationcycle:from0to999minutes(thefactorydefaultis120minutes)
11.ventilationtime:from0to999seconds(thefactorydefaultis30seconds)
12.Temperaturemeasurementlength:About2meters