28.3% OFF

W1209 Incubator Temperature Controller Circuit DC 12V

৳ 215.00

  • Supply 12V DC
  • Control : AC / DC Light, Heater etc.
  • Output Relay 20A
  • NTC waterproof sensor
  • Control range: -50 ~ 110
  • Input Power: DC 12V
  • Resolution: -9.9-99.9 0.1 , other temperature ranges 1
  • Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
  • Measurement accuracy: 0.1
  • Output range: 1 way 10A relay
  • Control accuracy: 0.1
  • Environmental requirements: -10-60 , humidity 20% -85%
  • Hysteresis accuracy: 0.1
  • Size: 48 * 40mm
  • Refresh rate: 0.5S
  • Power consumption: Static current: <= 35MA,attract current:<= 65MA
  • Temperature protection :0-110
  • Display Type: 0.28 ” three digital display tube
  • Connect the power supply and the load, you can supply to the controller,Is displayed as a measured temperature,Press the SET button, the display flashes the temperature,Press + – to set the desired temperature,After setting press SET to confirm return,The controller automatically performs the relay by setting off!
  • Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display — as high temperature protection.
  • Parameter Function:Long press SET 5 seconds to enter the main menu settings, press the + – toggle P0 … P8 long press SET or 10 seconds of no key activity confirmed their return to the controller

Description

  • W1209 ডিজিটাল ইনকিউবেটর কন্ট্রোলার সার্কিট।
  • এই কন্ট্রোলার দিয়েই অটোমেটিক ভাবে আপনার ইচ্ছামত তাপমাত্রা নিয়ন্ত্রন করতে পারবেন।
  • এই সার্কিট ব্যবহার করে খুব সহজেই টার্কি, তিতি, কোয়েল, হাঁস-মুরগীর, কবুতরের ডিম ফোটাতে পারবেন।
  • ব্যবহার ক্ষেত্র: ইনকিউবেটর, গিজার, এ্যাকুরিয়াম, হ্যাচারি, টোবাকো ফ্যাক্টরি, রংয়ের কারখানা, মেশিন রুম, ফ্রিজ, কম্প্রেসর, এ/সি, ঔষধ কোম্পানী ইত্যাদি।
  • W1209 কালো পলির ইনটেক প্যাকেট থাকবে। ডিফল্ট অবস্হায় P0= C থাকে যা কুলিং যেমন এয়ারকন্ডিশন, ফ্রিজ, এয়ার কুলার এ অটোমেটিক তাপমাত্রা কন্ট্রোল করার জন্য।
  • আপনি যদি ইনকিউবেটরে ব্যবহার করেন তার জন্য P0= H (হিটিং) করে নিতে হবে যেমন ইনকিউবেটর, হিটার, গিজার, সিলিং প্লেট এর তাপমাত্রা কন্ট্রোল করার জন্য এবং ঠান্ডা করার জন্য PO=C করে নিতে হবে ।
  • কিভাবে করবেনঃ পাওয়ার দিয়ে সেট বাটন ৫ সেকেন্ড ধরে রাখলে P0 লেখা আসবে আবার সেট বাটন চাপলে C লেখা আসবে তারপর (+)/(-) বাটন চেপে C➡H করে আবার সেট বাটন চাপলে ৫ সেকেন্ড পর H সেভ হবে।

Additional information

Weight 0.05 kg
Dimensions 4 × 4 × 2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Cart
Your cart is currently empty.